Struct zinc_hal_lpc11xx::ioregs::SYSCON_sysahbclkctrl_Get [−] [src]

pub struct SYSCON_sysahbclkctrl_Get {
    // some fields omitted
}

SYSAHBCLKCTRL: System AHB clock control

Methods

`impl SYSCON_sysahbclkctrl_Get`

`fn new(reg: &SYSCON_sysahbclkctrl) -> SYSCON_sysahbclkctrl_Get`

Create a getter reflecting the current value of the given register.

`fn raw(&self) -> u32`

Get the raw value of the register.

`fn rom(&self) -> SYSCON_sysahbclkctrl_rom`

Get value of ROM field: Enables clock for ROM.

`fn ram(&self) -> SYSCON_sysahbclkctrl_ram`

Get value of RAM field: Enables clock for RAM.

`fn flashreg(&self) -> SYSCON_sysahbclkctrl_flashreg`

Get value of FLASHREG field: Enables clock for flash register interface.

`fn flasharray(&self) -> SYSCON_sysahbclkctrl_flasharray`

Get value of FLASHARRAY field: Enables clock for flash array access.

`fn i2c(&self) -> SYSCON_sysahbclkctrl_i2c`

Get value of I2C field: Enables clock for I2C.

`fn gpio(&self) -> SYSCON_sysahbclkctrl_gpio`

Get value of GPIO field: Enables clock for GPIO.

`fn ct16b0(&self) -> SYSCON_sysahbclkctrl_ct16b0`

Get value of CT16B0 field: Enables clock for 16-bit counter/timer 0.

`fn ct16b1(&self) -> SYSCON_sysahbclkctrl_ct16b1`

Get value of CT16B1 field: Enables clock for 16-bit counter/timer 1.

`fn ct32b0(&self) -> SYSCON_sysahbclkctrl_ct32b0`

Get value of CT32B0 field: Enables clock for 32-bit counter/timer 0.

`fn ct32b1(&self) -> SYSCON_sysahbclkctrl_ct32b1`

Get value of CT32B1 field: Enables clock for 32-bit counter/timer 1.

`fn ssp0(&self) -> SYSCON_sysahbclkctrl_ssp0`

Get value of SSP0 field: Enables clock for SPI0.

`fn uart(&self) -> SYSCON_sysahbclkctrl_uart`

Get value of UART field: Enables clock for UART. See Section 3.1 for part specific details.

`fn adc(&self) -> SYSCON_sysahbclkctrl_adc`

Get value of ADC field: Enables clock for ADC.

`fn wdt(&self) -> SYSCON_sysahbclkctrl_wdt`

Get value of WDT field: Enables clock for WDT.

`fn iocon(&self) -> SYSCON_sysahbclkctrl_iocon`

Get value of IOCON field: Enables clock for I/O configuration block.

`fn can(&self) -> SYSCON_sysahbclkctrl_can`

Get value of CAN field: Enables clock for C_CAN. See Section 3.1 for part specific details.

`fn ssp1(&self) -> SYSCON_sysahbclkctrl_ssp1`

Get value of SSP1 field: Enables clock for SPI1.