Struct zinc_hal_lpc11xx::ioregs::GPIO0_iev_Get [−] [src]

pub struct GPIO0_iev_Get {
    // some fields omitted
}

IEV: Interrupt event register for port n

Methods

`impl GPIO0_iev_Get`

`fn new(reg: &GPIO0_iev) -> GPIO0_iev_Get`

Create a getter reflecting the current value of the given register.

`fn raw(&self) -> u32`

Get the raw value of the register.

`fn iev0(&self) -> bool`

Get value of IEV0 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev1(&self) -> bool`

Get value of IEV1 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev2(&self) -> bool`

Get value of IEV2 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev3(&self) -> bool`

Get value of IEV3 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev4(&self) -> bool`

Get value of IEV4 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev5(&self) -> bool`

Get value of IEV5 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev6(&self) -> bool`

Get value of IEV6 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev7(&self) -> bool`

Get value of IEV7 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev8(&self) -> bool`

Get value of IEV8 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev9(&self) -> bool`

Get value of IEV9 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev10(&self) -> bool`

Get value of IEV10 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.

`fn iev11(&self) -> bool`

Get value of IEV11 field: Selects interrupt on pin x to be triggered rising or falling edges (x = 0 to 11). 0 = Depending on setting in register GPIOnIS (see Table 109), falling edges or LOW level on pin PIOn_x trigger an interrupt. 1 = Depending on setting in register GPIOnIS (see Table 109), rising edges or HIGH level on pin PIOn_x trigger an interrupt.