Struct zinc_hal_lpc11xx::ioregs::CT16B0_emr_Get
[−]
[src]
pub struct CT16B0_emr_Get {
// some fields omitted
}EMR: External Match Register (EMR). The EMR controls the match function and the external match pins CT16B0_MAT[2:0].
Methods
impl CT16B0_emr_Get
fn new(reg: &CT16B0_emr) -> CT16B0_emr_Get
Create a getter reflecting the current value of the given register.
fn raw(&self) -> u32
Get the raw value of the register.
fn em0(&self) -> bool
Get value of EM0 field: External Match 0. This bit reflects the state of output CT16B0_MAT0/CT16B1_MAT0, whether or not this output is connected to its pin. When a match occurs between the TC and MR0, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[5:4] control the functionality of this output. This bit is driven to the CT16B0_MAT0/CT16B1_MAT0 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
fn em1(&self) -> bool
Get value of EM1 field: External Match 1. This bit reflects the state of output CT16B0_MAT1/CT16B1_MAT1, whether or not this output is connected to its pin. When a match occurs between the TC and MR1, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[7:6] control the functionality of this output. This bit is driven to the CT16B0_MAT1/CT16B1_MAT1 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
fn em2(&self) -> bool
Get value of EM2 field: External Match 2. This bit reflects the state of output match channel 2, whether or not this output is connected to its pin. When a match occurs between the TC and MR2, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[9:8] control the functionality of this output. Note that on counter/timer 0 this match channel is not pinned out. This bit is driven to the CT16B1_MAT2 pin if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
fn em3(&self) -> bool
Get value of EM3 field: External Match 3. This bit reflects the state of output of match channel 3. When a match occurs between the TC and MR3, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[11:10] control the functionality of this output. There is no output pin available for this channel on either of the 16-bit timers.
fn emc0(&self) -> CT16B0_emr_emc0
Get value of EMC0 field: External Match Control 0. Determines the functionality of External Match 0.
fn emc1(&self) -> CT16B0_emr_emc1
Get value of EMC1 field: External Match Control 1. Determines the functionality of External Match 1.
fn emc2(&self) -> CT16B0_emr_emc2
Get value of EMC2 field: External Match Control 2. Determines the functionality of External Match 2.
fn emc3(&self) -> CT16B0_emr_emc3
Get value of EMC3 field: External Match Control 3. Determines the functionality of External Match 3.